Complete Instrument Panels - Zenith Aircraft Company

NEW Dynon SkyView 10-inch glass panel withpower panel and new Dynon COM and intercom:

Zenith Aircraft Company supplies complete instrument panels and avionics kits to help builders complete their own custom instrument panels, using the most modern available avionics.

The complete Instruments / Avionics Package for the Zenith CH 750 includes the following:

PRE-CUT INSTRUMENT PANEL
NIMBUS PANEL COVERING (GREY)
DYNON SKYVIEW 10-inch DISPLAY
DYNOM COM RADIO
DYNON INTERCOM
RSP-1 POWER PANEL
APPROACH WIRE HARNESS
SV-XPONDR-262 SKYVIEW (Dynon)
MODE S INTEGRATED TRANSPONDER

RAC STICK GRIPS G101�
FUEL FLOW TRANSDUCER
INTERNAL LI-ION BACKUP BATTERY
OUTSIDE AIR TEMP (OAT) PROBE
COM ANTENNA AV-10
TRANSPONDER ANTENNA
ANTENNA WIRE AND BNC CONNECTOR
ENGINE PROBE (CHT AND EGT SENSOR)
(Equipment and details subject to change)

View a video clip of the above instrument panel kit

Contact us for details on available Garmin avionics or other requirements you may have.

Below: Instrument Panel, as equipped on the STOL CH 750 prototype factory demonstrator aircraft (for the Continental O-200 engine).

NEW: Video Tour of the Instrument Panel (as equipped above) | Video of Instruments / Avionics Kit | Sample Instrument Panel Layouts (template)

Zenith Aircraft Company supplies complete instrument panels and avionics kits to help builders complete their own custom instrument panels:
Let us know what your custom avionics needs are… whether you need a single instrument or a full custom panel.

Free Newsletter

By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

“Every effort is made to provide information that is accurate. However, materials contained in this Website are subject to change at any time. We give no assurance or warranty that information on this site is current, and take no responsibility for matters arising from changed circumstances or other information or material which may affect the accuracy or currency of information on this site.”

@ 2024

Zenith Aircraft Co. All Rights Reserverd

CONDITIONS OF SALE AND WARNING NOTICE

Zenith Aircraft Company has been established to service the needs of sport pilots as a Supply House for recreational aircraft hobbyists, making available aircraft designs, kits, and parts for educational purposes. Sometimes, things run into snags for reasons beyond our control. Most of them are so-called “Acts of God” like earthquakes, tornadoes, floods, fires, and the like, but some are also man-made, such as labor strikes, transportation snafus, etc. If they happen, customers get mad – and we don’t blame them – but we must assign the cause where it belongs instead of being blamed or all the trouble. We earnestly hope that you won’t run into any problems (most of our customers don’t), but we are obligated to let you know the extent of our protecting your interest that is within our power to provide. Please read the following carefully, because if conditions listed below are not acceptable to you, you should not place this order (unless changes are made with acceptance in writing from Zenith Aircraft Co.). Your filling in this Order Form and delivering it to us constitutes your understanding and agreement of the following conditions and requirements. Thank you for your goodwill and confidence in Zenith Aircraft Company.

No orders are accepted by Zenith Aircraft Co., hereafter also called the Company, or Seller, unless accompanied by a payment of not less than 50-percent of the list price of all parts / kit ordered, and unless accompanied with this signed Conditions of Sale and Warning Notice. Full payment is required for the Drawings and Manuals.
This contract permits the buyer to build one airplane or part of it in the Custom-Built, Experimental, Ultralight, etc. category. The type of aircraft and the Drawings serial number must be visibly marked on the vertical tail or fuselage sides of the aircraft. The buyer is advised that the Drawings, Manuals, and/or parts contain proprietary rights. The buyer covenants and agrees that he will not: a) Reproduce, b) Communicate, c) Transfer, sell, exchange or modify them or any part of them, d) Permit any other person to use said drawings, manual, and/or parts, without the written permission of the Company. The sole purpose of the plans, drawings, manuals, and parts is strictly educational and there is no implied or expressed warranty. During the construction the buyer is to cause the structure and installations to be inspected and approved by the relevant government and/or aviation authority (FAA). The Buyer agrees to notify the Company in writing immediately of the sale of any Drawings and Manuals, parts, components, or kit, whether completed or not, supplying the complete name and address of the new owner(s).
The Company will not be held responsible for any delays in deliveries due to delays of carriers, fires, and other Acts of God, or other causes for delay beyond its control.
Claims for defective materials or missing parts will be allowed only when such claims are made within thirty (30) days from the date of delivery. No goods may
be returned unless previously authorized by the Company. (Inspect your order for missing or damaged parts immediately upon receipt).
Orders accepted by the Company may be canceled by the buyer within fifteen days of the date of order without the company’s advance approval, provided: a 10-percent cancellation charge is assessed if goods were not yet shipped, or a 20-percent charge if the goods were shipped and are returned. Any delivered order not picked-up or accepted by the buyer for more than thirty days shall be considered to be forfeited. Drawings and Manuals, or other printed materials, may not be returned for credit or refund. PROVIDED HOWEVER, in no event will seller accept goods for return for any reason the earlier of thirty days (30) days from the date of shipment, or assembly, installation, construction, or modification of any product, whichever occurs first.
Unless otherwise specified, the buyer agrees to pay in full for, and take delivery of, the merchandise in not more than two weeks after receiving notification that it is ready for shipment. Storage rental shall be charged beyond that time. It is the sole responsibility of the buyer to pay any applicable sales tax or usage tax, in whichever state(s), and all applicable shipping and shipping related charges.
All orders not delivered for lack of shipping instructions, payments, or any other delays caused by the buyer for longer than thirty days shall be considered forfeited and void, and the Company will have the right to scrap or dispose of the merchandise at its discretion and retain the full deposit.
All prices are F.O.B. Factory and subject to change without notice. Delivery to the Carrier shall constitute the delivery to the buyer, and the responsibility for the goods in transit shall be the Carrier’s and the buyer’s. A Bill of Lading (or Way-Bill) shall be sufficient evidence and proof of the date of shipment. Claims of damage in transit shall be made to the Carrier and not the Company. NOTICE: If any container or crate shows the slightest damage on delivery, it should be opened and inspected before acceptance from the Carrier, and a statement of damage made immediately. Insurance of goods in transit is the responsibility of the buyer, and the Company will not pay for goods damaged in transit, nor for shipping charges to and from the factory of returned shipments, damaged, or replacement parts.
This contract shall be governed by and construed in accordance with the laws of the State of Missouri, and is the only contract controlling this sale and purchase, and it contains all the agreements, expressed or implied, either verbal or in writing, made between the Company and the buyer. If any provisions of this contract shall be held to be invalid, the remaining provisions shall continue to be valid. This Agreement and the covenants, promises and agreements contained herein shall be governed in accordance with the laws of the state of Missouri, United States. This Agreement shall be deemed executed and delivered in Missouri. The parties consent to the venue of any state court sitting in Audrain County, Missouri, United States, or the United States District Court, Eastern District of Missouri, in any action brought to enforce the terms of this Agreement. The parties irrevocably and unconditionally submit to the jurisdiction (both subject matter and personal) of any such court and irrevocably and unconditionally waive: (i) any objection any party might now or hereafter have to the venue in any such court; and (ii) any claim that any action or proceeding brought in any such court has been brought in an inconvenient forum. The parties acknowledge that the United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement.
Custom-built aircraft are licensed by the government to fly in the applicable “Experimental,” “Amateur-Built” or “Ultralight,” etc. category. Each aircraft is treated legally by the governing authority (FAA) as a “one-of-a-kind” in design and construction, and is liable to be unpredictable, hazardous, and even potentially lethal. Therefore, construction and operation of such aircraft may be unsafe without acquiring, studying and complying to the letter of all instructions and manuals pertaining thereto. The Seller does not warrant that the aircraft as constructed by the buyer, or any other person, will be airworthy, or will qualify for certification or registration by aviation authorities, or will meet the requirement of the buyer. Notwithstanding the forgoing, seller may provide from time to time, but is not required to provide, technical assistance during the assembly, installation and construction process. However, buyer and seller specifically agree that responsibility for building the aircraft or its parts shall rest solely with the buyer and that no liability shall arise from or extend from any technical assistance provided by seller. Purchaser acknowledges that the assembly and construction of the product requires certain technical experience and skill. Further seller and purchaser specifically agree that the seller cannot and does not warrant the ability of any individual, including purchaser, to properly assemble, construct and maintain an aircraft kit of the kind sold by seller. In exchange for such technical assistance, purchaser and seller specifically agree that purchaser shall hold harmless seller from any and all liability which may arise from any technical advice provided by seller, seller’s employee, or seller’s agent.
EXCLUSIONS OF WARRANTIES, NO WARRANTIES. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE EXCLUDED FROM THIS TRANSACTION AND SHALL NOT APPLY TO THE GOODS SOLD, THE CONSTRUCTION OF THE GOODS, THE PLANS & MANUALS, THE GOODS WORKMANSHIP, THE SAFETY OF THE GOODS DESIGN OR ANY OF THE GOODS COMPONENTS.
In recognition of the above, and because they cannot control nor assure quality and accuracy of compliance with their instructions during and after construction of such aircraft, the Seller and/or Owner (and their agents, servants, employees, contractors, successors and assigns) hereby give notice to the Buyers and/or Operators (and their heirs, administrators and assigns) of this aircraft, that they carry no liability insurance.
BY SIGNING THIS DOCUMENT, AND BY PROCEEDING WITH THIS ORDER, THE BUYER ATTESTS THAT HE HAS THE FULL AUTHORITY AND CAPACITY TO SIGN AND VALIDATE THIS DOCUMENT. THE BUYER(S) AND/OR OPERATOR(S), AS DEFINED ABOVE, ACKNOWLEDGE THE RECEIPT AND UNDERSTANDING OF THIS WARNING NOTICE AND SO SIGNIFY, BY THEIR DECISION TO GO AHEAD WITH PURCHASING, ACCEPTING AND OPERATING THIS AIRCRAFT, OR ANY OF ITS PARTS, AND AGREE TO HOLD THE SELLER AND/OR OWNER, AS DEFINED ABOVE, HARMLESS FROM ALL LIABILITY AND FROM ANY CLAIMS OF DAMAGES AND CAUSES OF ACTION WHICH MAY BE INCURRED BY THEM OR ANY THIRD PARTY AS A RESULT OF THE PURCHASE, USE, CONSTRUCTION, AND OPERATION OF THIS AIRCRAFT, ITS PLANS, PARTS AND COMPONENTS.