Back to Builder Resources Page

Additional Information and Resources

STOL CH 750 STOL Additional Information
Check the NewPlane.com website for ongoing airworthiness notices and service letters
LinkDescriptionRevisionLast Update
Inspection of the Main Gear Spring Attachment Points  5/2018
Fuel System Inspection  1/2018
Horizontal Stabilizer – Inspection Mandatory  1/2017
Control System UpdateControl Torque Tube 75C2-5 Update: Added bolt to stiffen and strengthen the control torque tube 2/19/16
CorrosionWing strut and general corrosion inspection, lubrication and general aircraft maintenance 1/2016
Sensenich Prop Service Bulletin 2014-02-04Discontinue use of Jabiru composite propeller blades on UL Power Engines 2/4/14
Whirlwind Prop Service LetterSL-GA-J2B-012714BLADE CLAMP BOLT CRACK: All WhirlWind GA-J2B propellers with hubs in the Serial Number range 1000 to 1107 installed on UL Power engines 1/27/14
Rudder Pedals Safety AlertCheck rudder pedals for the correct material thickness (serial numbers 75-8563 to 75-8950) 9/26/13

STOL CH 750 Resources
LinkDescriptionRevisionLast Update
FAA NKETFAA letter determining STOL CH 750 kit allows amateur builder to register the plane as an “amateur-built – Experimental” aircraft (meeting the “major portion” requirement of Title 14, Code of Federal Regulations part 21, Certification Procedures for Products and Parts, � 21.191(g). Letter dated May 20, 2010.  
STOL 750LS POHDRAFT STOL CH 750 Pilot Operating Handbook
Note: This is the POH used with the STOL 750LS S-LSA aircraft, with O-200 engine. The manual may not be applicable to amateur-built aircraft (with different engines).
March 20099/2010
STOL 750LS MAINTDRAFT STOL CH 750 Maintenance Manual
Note: This is the maintenance manual for the STOL 750LS S-LSA aircraft with O-200 engine. The manual may not be applicable to amateur-built aircraft (with different engines).
March 20099/2010
STOL CH 750 Parts CatalogSTOL CH 750 Parts Catalog (2nd Edition)2nd ed.9/2010
701-contstruct-manualSTOL Basic Construction Manual 18 pages – 4th edition4th ed.12/2003
CSConstruction Standards for Zenair Light AirplanesDraft1/07

This web site is published strictly for informational purposes. It is maintained to provide a forum for exchanging information about Zenair designs. Any pictures, diagrams, drawings or graphs, are used for general identification only, and are not to be taken to represent technical drawings or replicas of exact parts. You should not consider the educational material in the web site to be the practice of general aviation.

This site is not intended to replace, substitute for or supersede any technical information contained in the drawings, any Federal Aviation Administration regulations, or the manufacturer’s manuals.<

Neither Zenith Aircraft Company (ZAC) nor the authors guarantee the accuracy or completeness of any information published herein and neither ZAC or any other authors shall be responsible for any errors, omissions, or damages arising out of use of this information. This site is offered with the understanding that ZAC and any other authors are supplying information but are not attempting to render engineering or other professional services. If such services are required, the assistance of an appropriate professional should be sought.

These statements are to be considered disclaimers of responsibility from anything published here.